Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #62699
    Paul Smith
    BRONZE Member

    Good afternoon everyone, well in East Anglia at least. I inherited a BEO RX-2 and it does all the mechanical things it is supposed to do, however I suspect the MMC-5 Cartridge is faulty. When I looked under the turntable the setting wasn’t on MMC setting so I suspect this cartridge has been a replacement. The current sound is poor and distorted so without having to shell out £300 for a new one, I was hoping there might be someone out there near Norwich that might have a MMC-5 working so I try it my machine and eliminate this as the fault? Long Shot. Under a microscope the stylus looks old and filthy so I am hoping that this is the problem. I have purchased a pre amp to see that would help but it didn’t, more sound but still distorted.

     

    Paul

    #62728
    Dillen
    Moderator

    Clean the stylus carefully.

    Martin

    #62737
    Paul Smith
    BRONZE Member

    Thanks, I will try with alcohol on a fine brush, maybe a cotton bud but that might leave debris behind. Thanks Dillen

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.