Making AUX input work on Beocenter 9300

[Sebastien]

Hi everyone

I recently acquired a Beocenter 9300, and I’m trying to connect a Bluetooth Receiver/Transmitter to the AUX input. The BT device works (I’ve been using it on my previous Hifi amplifier); it connects via RCA, so I’ve purchased an RCA – 7-pin DIN cable, and I’ve connected it into the TV/AUX input on the back of the Beocenter 9300. When I turn everything on, connect my phone into the BT device, and start streaming, the AUX does not activate on the Beocenter; and I can’t activate it manually (pressing the AUX touch-button doesn’t do anything). Since I don’t have a remote control for the Beocenter, what do you suggest I do to activate it?

Thanks for your help!

 

Location: Paris, France

Favourite Product: Beocenter 9300

[lausvi]

Only a B&O-product would talk Beolink, and make the BC to start from an input, it won’t start by an incoming audio signal only.

Do the other input or the standby touch-button work? Can you test it in TAPE2? The glass panel with the touch-buttons might be loose (due to aging of the double-sided tape that holds it into the frame) and the glass might have lifted on the edge of the glass panel causing the touch-buttons not to work (or needing a stronger push to first push the glass panel back down to the original position).

Location: Helsinki - Finland

My B&O Icons:

[Author]

Posts