Home Forums General Discussion & Questions home cinema Almando

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #60966
    dueno
    GOLD Member

      hi,

      do any of you use the almando solution to make home cinema with bang&olufsen?

      What do you think of it?

      thanks.

      #60968
      TinusAMS
      BRONZE Member

        I had the Almando Multiplay Surround Decoder with WiSa with a Sony A90J and Beolab 28’s.

        It was not a good marriage with the Sony tv, E-ARC constantly lost it’s handshake, so no sound. ARC worked fine. Although there’s a delay in turning on/off the tv and the 5v trigger to the 28’s in my case. So the 28’s closed after 10+ seconds after the tv was off. Which kinda killed the B&O magic for me 😉 The sound quality was noticably worse via ARC though. To be honest, it could have been a Sony issue, but I was not satisfied. My dealer had lot’s of clients where it worked perfectly.

        Hall Audio WiFi Streamer is an alternative solution with 5v trigger for B&O and it’s cheaper as well.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.