[HELP] Replace IC9 8355 Input/Output in Beocord 8004. - BeoWorld Forum

This topic has 3 replies, 2 voices, and was last updated 11 months, 4 weeks ago by Dillen.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
29 December 2023 at 03:40 #51647
beolover.vn
BRONZE Member
My device has an issue with IC9, can I purchase a similar one available on eBay for replacement? Seeking advice. Thank you!
29 December 2023 at 09:13 #51648
Dillen
GOLD Member
It’s mask programmed by/for B&O.

But these rarely fail.
What are the symptoms?

Martin
30 December 2023 at 05:37 #51649
beolover.vn
BRONZE Member
When pressing play, the motor does not engage, and the heads do not lift up.
30 December 2023 at 08:40 #51650
Dillen
GOLD Member
Does the display light up ?

Martin
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.