Home › Forums › Product Discussion & Questions › BeoLab › Faulty Beolab 3500
- This topic has 2 replies, 2 voices, and was last updated 10 months, 1 week ago by theoz.
Viewing 3 posts - 1 through 3 (of 3 total)
-
AuthorPosts
-
17 January 2024 at 05:07 #52230
Hi all,
I reveived a beolab 3500 from a new owner of an old house with B&O material.
But the beolab 3500 doesn’t power on.
Someone knows what i could verify first ?
Thanks
Theo from Strasbourg
17 January 2024 at 20:18 #52231Is there a red LED with lights on?
If it is the later version of the BL3500 (MK2) it will not react to source commands if it is not connected to an audiomaster.
To check for signs of life you could try to press Menu, 0, 0, GO on your remote (is it a BEO4 remote you have?)
This should give som basic information in the display like sw version
18 January 2024 at 11:57 #52232Hi,
No red light on. And it’s the mk1 version.
i have a beo4 and a Bl1000.
Thanks
Theo
-
AuthorPosts
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.