Connection Beogram 2404 to BeoMaster 1900 - BeoWorld Forum

This topic has 1 reply, 2 voices, and was last updated 2 weeks, 4 days ago by Dillen.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
13 November 2025 at 17:56 #71156

Rod Kruse
BRONZE Member

Can i connect a Beogram 2404 turntable to a Beomaster 1900 receiver? Thank you for any help you can offer.

16 November 2025 at 17:11 #71243

Dillen
Moderator

Yes. Just plug it in.
If the Beogram 2404 has 7 pins in the DIN plug, you must unscrew the outer two using a small flat-bladed (watch-makers) screwdriver, or the Beomaster socket will not accept it.
The two pins are for datalink communication, which is not supported by Beomaster 1900.

Martin
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.