Home Forums Product Discussion & Questions BeoSound BS9000 MK I – power PCB schematic

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #40504
    kordina
    BRONZE Member

      Hi guys,

      I have a problem with my MK 1 and unfortunately the site service manual is not complete. Does anyone of you have the schematic relating to the power board? It´s the circuitry relating to the voltage generation around the LM3578 (there are at least 4). Unfortunately the MK2 and 3 are completely different thus I cannot use those manuals as help.

      Regards,

      Staffan

      #40505
      Keith Saunders
      FOUNDER Member
        • Hampshire, England

        Staffan,

        Apologies for the late reply.

        As the BeoSound 9000 Mark 1 manual is about 2 cm thick I just scanned the power supply section which is below and attached in a PDF. Click on the image to see it in large format.BS9000 Mark 1 Power Supply Drawing

        #40506
        kordina
        BRONZE Member

          Excellent Keith! This is the schematic I need!  Would it be possible to copy the related PCB to allow me identifying the components on the board?

          Many thanks in advance!

          Staffan

          #40507
          kordina
          BRONZE Member

            Hi,

            If I wasn´t clear enough, the service manual also show the layout of the boards. I would need a copy of the Power Board layout to clearly identify the components in the schematic 🙂

            Luckily I have a working Beosystem 6000 which is doing it´s service of entertaining us 🙂

            Regards,

            Staffan

            #40508
            kordina
            BRONZE Member

              Sorry my mistake Keith. I checked my data again and found the PCB layout I needed.

              Regards,

              Staffan

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.