Home › Forums › Product Discussion & Questions › BeoSound › BS Ouverture no sound to speakers
- This topic has 2 replies, 2 voices, and was last updated 2 days, 18 hours ago by
-
AuthorPosts
-
4 July 2025 at 21:01 #66787GOLD Member
Hi all
Have an Ouverture connected to Bl 5000’s(?), it has been working fine, today booted up fine and the after an hour or so went quiet.
The speakers are fine, showing intended sound source, the earphone socket is working but on reduced volume.
Any suggestions as to what to look at etc would be greatfully received
Thanks
Tony
5 July 2025 at 09:41 #66794GOLD MemberSo, after some thought, I unplugged all connections , gave plugs and sockets a squirt of contact and switch cleaner and reconnected all, and as the french would say — et voila — all now works again!
I don’t understand why though!
5 July 2025 at 14:35 #66807GOLD MemberMaybe you have not been talking to it in French enough lately? 🙂
Nice to see it works again!
Regards, Johan
Location: NetherlandsMy B&O Icons: -
AuthorPosts
- You must be logged in to reply to this topic.