Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoMaster BM 6000 (Type 2252) – constant hiss on one channel

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #36272
    Beopol
    BRONZE Member

    Hi, I’m new here as I bought beautiful set of classic B&Os (BM 6000, BG 6006, BC 6000, BV S80) but there are some issues. There is a hiss on right channel. The hiss has the same volume (quiet but noticable “ssssssssss”) regardless of volume of the music. Did you come across this problem before on BM 6000 or other amps?

    Regards,

    Tad

    #36273
    Die_Bogener
    BRONZE Member

    Yes, it could be a broken ground connector or track on a board, broken solders.

    When all sources have this problem, it is inside the (pre)-amp.

    If possible and if the preamp can be disconnected: apply a different source carefully to the amp. If gone, it’s the preamp. If not, the amp.

    If it is more a 50Hz humming sound: defect power source, dead caps.

    #36274
    hcraig244
    BRONZE Member

    This could also be a noisy transistor……I have had this problem in the past.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.