Home › Forums › Product Discussion & Questions › BeoVision › beovision avant 55 lcd purple screen and how to dismantle
- This topic has 1 reply, 2 voices, and was last updated 1 day, 22 hours ago by
Billywedlock.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
10 July 2025 at 10:06 #66899
nitro2
BRONZE MemberHi forum ,
My Beovision avant 55 lcd is defective, narrow lines and purple screen (whilst we were watching tv) .
First question is how to dismantle it to get to the pcb’s
Second question is , familiar problem and how to cure it ?
hope some one can help me out
30 September 2025 at 09:07 #70004Billywedlock
BRONZE MemberFrom my personal experience, the first time (out of many) this happened to me, the engineer had to replace a video board. B and O used to refurbish them (the boards) to use as replacements (before they fail again) . You will need to contact your local dealer who will have an engineer to assist. But it sounds very much like one of the video boards will need changing.
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.