beosound 9000 vertically, srews and sleeves lost

[Horst Schneider]

Hi everyone,

I recently rediscovered my beloved BeoSound 9000 after it spent many years in storage. I’m now trying to mount it vertically on the wall using the original B&O wall bracket – which to me is still one of the most beautiful ways to display this iconic piece.

Unfortunately, during the years in storage the original mounting hardware got lost – you know how it is, moving houses a couple of times and suddenly the small bag of screws is just gone 😊

The manual only mentions M4 screws without giving exact lengths. The screws need to pass through the metal distance sleeves and a 5mm plate, then thread into the bottom of the BeoSound 9000 chassis.

Could anyone help me with the exact specifications:
– Screw length (my best guess is M4 x 20mm)
– Sleeve inner diameter, outer diameter and height

Any help from someone who has the original hardware or a service manual would be greatly appreciated!

grüße horst

[billb]

you may want to check with STBbrackets, http://www.STBbrackets.co.uk, they sell a proper screw set for the wall mounting brackets.

Bill

[Peter the Biker]

This link doesn’t work, but that link does: https://www.stbbrackets.co.uk/

Location: Eastwestfalia

My B&O Icons:

[Author]

Posts