Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoSound BeoSound Level Setup

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #43083
    terenceheath
    BRONZE Member

    Hi.

    Is it possible to set up the Level so that it automatically switches to aux input/line in if it detects a source?

    I have a 9000 connected to a pair of Levels, but canโ€™t get them to switch to aux when I play the CDs in the 9000. Thanks!

    #43084
    Mbee
    BRONZE Member

    Try to change the line input sensitivity under the sound settings.

    #43085
    terenceheath
    BRONZE Member

    Thanks Mbee. Iโ€™ve tried setting it to high but that didnโ€™t resolve it.

    #43086
    Stan
    BRONZE Member

    How are they connected?ย  PL to Aux-in?ย  If so, I’d turn up the volume on the BS9000.

    I think it’s also possible to connect from the BS’s AUX port… you just need to make sure to find an RCA to DIN cable with 4 RCA leads (2 input/2 output).ย  However, as others have mentioned, the BS9000 needs to think it has speakers connected to it.

    The auto-sense line-in works fine on my Balance (another Mozart speaker) – I have a turn table connected to it.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.