Beomaster 4400 fm signal showing but no sound? - BeoWorld Forum

This topic has 2 replies, 3 voices, and was last updated 15 hours, 27 minutes ago by Dillen.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2 February 2025 at 13:43 #63310
bob sprowson
BRONZE Member
Just bought 4400 . Lights up, shows fm signal but no sound to speakers. Any suggestions?
2 February 2025 at 21:59 #63338
filip_kbh
BRONZE Member
Have you pressed the buttons for Speakers down on the front (there are two separate buttons)? Also, the balance pot may need a cleaning.

Location: Copenhagen
4 February 2025 at 15:52 #63396
Dillen
GOLD Member
Wrong setting of muting level, perhaps.
Try without Silent Tuning (AFC/ST off).

Martin
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.