Home › Forums › General Discussion & Questions › General Discussion & Questions › Beomaster 1900 humming/hiss
Tagged: Beomaster 1900 hum/hiss
- This topic has 2 replies, 2 voices, and was last updated 11 months, 1 week ago by
Dillen.
Viewing 3 posts - 1 through 3 (of 3 total)
-
AuthorPosts
-
14 May 2024 at 17:02 #55613
Asger รllgaard
BRONZE MemberHi there
I recently got my hands on a Beomaster 1900. Everything works great except a slight humming from the beomaster. Its not present when in standby mode, but whenever i turn on tape or phono the humming is there. But whenever i leave it on for a good while, it goes awayโฆ
Have any of you had any luck fixing this issue? If yes, suggestions would be greatly apprechiated!
Thanks in advance.
Asger
14 May 2024 at 17:05 #55614Asger รllgaard
BRONZE MemberPS. Sometimes the noise goes away in short periods of timeโฆ maybe that info is helpful.
14 May 2024 at 17:46 #55615Dillen
ModeratorTypical sign of aging capacitors. Grab a service kit and replace the lot.
Martin
-
AuthorPosts
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.