Home › Forums › Product Discussion & Questions › BeoLink › BeoLink Converter NL/ML
- This topic has 1 reply, 2 voices, and was last updated 3 months ago by
Madskp.
-
AuthorPosts
-
2 January 2025 at 19:17 #62185
Steen Clausen
BRONZE MemberHi
I have an BeoLink Converter NL/ML were I have a problem.
My setup is :
Master link
Beosound 3000 (Used for FM radio and timer play on my Masterlink speakers.)
Beosound 3500
Beosound 2000 (With TAPE button)
Then I have two televisions connected with NL Beovison Avant and 11.
On my BeoLink Converter NL/ML I have added a chromcast on line IN.
I can without problems hear line in audio on my two televisions.
If I press TAPE on my bola 2000 I also get the musik from line in.
But I can’t get the sound from line in on my Beosound 3000.
What have I done wrong?
How shall I program the converter to send the line in to A-AUX on the Beosound 3000?
3 January 2025 at 13:20 #62206Madskp
GOLD MemberYou may have to change the role of the NL/ML converter. Since you mention that you can acces from the Beolab 2000 by pressing Tape it sounds like you have set it up like a A.master or AV.Master. But your Beosound 3000 is probably also an Audio master (A.master) and there can not be 2 of those on the ML side of the converter.
Therefor I suggest that you setup the NL/ML converter as source center and then assign the Line in to either N.radio (PHONO on older remotes) or N.music (Atape2 on older remotes), and the use these remote commands instead.
Location: Denmark -
AuthorPosts
- You must be logged in to reply to this topic.