Beolab Transmitter and Beolab 18 - BeoWorld Forum

This topic has 4 replies, 2 voices, and was last updated 2 years, 10 months ago by Bbhewee.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
12 June 2022 at 12:16 #35432

rawxoox
BRONZE Member

Maybe a silly question, but did you make sure both the Beolabs are en pairing mode?

12 June 2022 at 18:55 #35433

Bbhewee
BRONZE Member

I did. It discovered both to be clear. Once I select and store the left Channel, it will find the second speaker but will only allow me to store it as a left channel also.

21 June 2022 at 18:57 #35434

Bbhewee
BRONZE Member

Bump.

21 June 2022 at 19:04 #35435

Bbhewee
BRONZE Member

Sorry I meant to say. There’s an intermediate step to selecting the next channel that wasn’t explained in the manual I had.
it’s in this version if ever someone else faces the same issue

https://stdrightnowassets.blob.core.windows.net/rightnowassets/UserFiles/File/RightNow/EN_WPL_TX_manual_setup_guide_FAQ.pdf
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.