Home › Forums › Product Discussion & Questions › BeoLab › Beolab 90 design secrets uncovered…
- This topic has 3 replies, 3 voices, and was last updated 1 year, 11 months ago by Tignum.
-
AuthorPosts
-
9 December 2022 at 01:42 #41366
Hi Beoworlders,
Want to know how the World’s most advanced loudspeaker was designed? It is time to find out… This video uncovers the design process of the amazing Beolab 90 from B&O!
Kind regards, Steve.
10 December 2022 at 10:56 #41367Thanks for this Steve, I find it really interesting to see why some design choices were made. Still curious how the one piece bezel is actually produced before it gets bent and polished!
10 December 2022 at 11:31 #41368This is an old YT video on Noto and BL90 Design. The fabrication of the crown and its economics is described briefly here at 18minutes.
10 December 2022 at 13:08 #41369Gotcha! A loop milled from a strip. Smart “software guy”! (19:12).
Good persistence to hold on to a design philosophy so much that a weld (that normally is hidden on the back) gets eliminated because the speaker is 360°, and hence has no back!
-
AuthorPosts
- You must be logged in to reply to this topic.