BEOLAB 9 SLP SINGLE DEIVER PROBLEM

[Paolo]

hi, i have a pair of beolab 9’s connected to a bs5/bm5. but the problem is that some time ago i’ve changed the calibration of each driver, from the driver behind, so now i cant get the perfect stereo image. for the tweeter it isn’t a problem becouse i’ve changed them recently so i changed the tweeter position ad it shown on the tweeter lable. so now how i can recalibrate the midranges and woofers to have a perfect stereo image?? like what spl do i need to have on the single driver??? what is the perfetto test tone for each driver??? at what volume of my bs5???

i wait for you,

paolo

[Leon Heesakkers]

The first thing you need to do is set the basic setting correctly according to the factory instructions below.

Attachments:

You must be logged in to view attached files.

[Beouser19]

Sorry..! TS You have make a BIG misstake if you not write down the old settings becaues its only on sparepart driver you have a label to adjust according to servicemanual , the original is without label (and not adjustable according to servicemanual because of unknown value) you have to use use a microphone and some audioanalyzer and tonegenerator in a quiet room like b&o do in factory

[Author]

Posts