Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoLab Beolab 8000 – constantly turning on and off

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #62846
    Henry Warkehr
    BRONZE Member

    Hello,

    I saw there has been a similar question a while ago but unfortunately no answer. So I hope some of you experienced something similar and have been able to find a solution.

    Both of my Beolab 8000 speakers have been displaying a weird behavior for a while now. They are connected to a streamer (node 2i) over the optical outlet. This set-up has worked quite well until a few weeks ago, since that point, once I pause whatever is playing on the TV they neither stay on nor off but always change between modes (see attached video). They are no pattern in them turning on/off, sometimes they change after a few seconds and sometimes after a couple of minutes.

    Did anyone have similar experiences and know how to repair it?

    Many thanks in advance!

    Henry

    #62851

    Has the black foam been replaced?

     

    Location: Netherlands
    #62906
    Henry Warkehr
    BRONZE Member

    Hey Gaea, thanks for your answer. As far as I know, the foam hasn’t been replaced yet. However, I wonder how the foam could have this effect. Isn’t the foam just the insulation?

    #62912
    francoisvl
    BRONZE Member

    The Foam starts to disintegrate and becomes a sticky goo that damages the PC boards causing a lot of issue and ultimately causing the speaker to stop working. Corrodes everything.

    #62916
    Henry Warkehr
    BRONZE Member

    Then I will check for the insulation material first and see if that will fix the problem. Thank you so much.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.