Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoLab Beolab 8000 + Active + Sonos Connect

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #43519
    Prime
    BRONZE Member

    Hi,

    I’m looking for a way to turn on my Beolab 8000 over Powerlink when my Sonos Connect starts playing. I don’t have a 5v trigger.

    what if I use a Beolink Active and connect it with my Sonos on the aux and I connect my Beolab 8000 to the Active with Powerlink.

    would this setup work? And is the IR eye needed for the Active in this setup?

    #43520
    Millemis
    GOLD Member

    You do not need any additional gear for that.
    Have a look at Steve’s video here:
    (If you are in a hurry start at 2:19)

    MM

    Location: Flensborg————Danmark
    #43521
    Prime
    BRONZE Member

    Sadly my autostart doesn’t work anymore on the line in 🙁

    #43522
    Millemis
    GOLD Member

    Bever heard of that before.
    Anyway – you can not use a Beolink Active as a standalone device.
    In that case, only option you have is a B&O Audiomaster/Beocenter/Beosound for the PL and for connecting to a free port (A.Aux/A.Tape……) there.

    MM

    Location: Flensborg————Danmark
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.