Home › Forums › Product Discussion & Questions › BeoLab › Beolab 5 not going to standby
- This topic has 1 reply, 2 voices, and was last updated 2 months, 3 weeks ago by
Mattias Forsell.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
2 May 2023 at 09:31 #46244
Expoman
SILVER MemberI have a friend with a Beosystem 3 with Beolab 5โs as the front speakers. ย The speakers both play with all sources, however the Beolab 5โs never go into standby mode the light in the lens stays green all the time. ย We have tried switching speakers left to right but the fault stays with the speaker. ย This leads me to think the issue is in the Beolab 5 amplifier. ย The problem should stay on the right side if it were a cable or The Beosystem 3 issue I would think.
Anyone have any suggestions or similar problems?
25 January 2025 at 15:21 #63074Mattias Forsell
BRONZE MemberI have the same problem with one of my speakers.
Did you find a solution for the problem? -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.