Beogram 6006/8000/8002/TX creaking dustcover hinge

[PeteV]

Hello,

I’m restoring a Beogram TX, and I’m having an issue with the dustcover hinge – it creaks loudly when lifting/lowering it.

I’ve dismantled the hinge several times, tried adding some lubricant between the plastic guide and the plinth, but it doesn’t help.

I noticed in an article on Beolover’s site, that there should be a teflon strip between the plastic guide and the plinth main body, which presumably allows the guide to slide more smoothly; howeer this is absent on my Beogram. Does anyone know the size of the teflon strip and how it is attached to the plinth – presumably some type of glue? The service manual is of no help here

Thanks in advance

Pete

[YannChris]

Hi Pete,

Look at this:

https://www.dksoundparts.com/product-category/beogram/beogram-tx/

Regards,

Yann.

Location: Brittany, France

My B&O Icons:

[PeteV]

Hi Yann,

Yes, I have seen that. However, as far as I can see this does not include the Teflon strip.

Regards

Pete

[Dillen]

The teflon sheet is apprx. 2 x 3 cm.

Martin

[PeteV]

Thanks, Martin.

I’ve replaced the teflon, and problem is now solved.

[Author]

Posts