Beogram 5500 platter wont spin

[Enggaard]

Hi,

I’m new to this forum and believe this is my first reach out for assistance.

I recently bought myself a Beogram 5500, type 5941. It has signs of age/use, but looks  OK.

I have an issue with it though, as the platter does’nt spin up when I press Turn or Play. What happens is that the platter motor spins ~1/4 turn then stops. At the same time I noticed that the solenoid for the carriage servomotor activates and the servomotor spins for a few seconds before it stops. Also  “33” lights up next to the pickup, but that’s all.

Any idea what could be the issue?

Thanks, Klaus

 

Location: Slagelse, Denmark

Favourite Product: Beosystem 3500

[Mark-sf]

Welcome to the forum! I would start checking the power supply voltages per the service manual. Given the units age, it may need new electrolytic capacitors or has a bad regulator.

[Dillen]

Record on the platter?

Martin

[Enggaard]

Hi Mark and Martin,

I’ll certainly check the voltage supplies. Motor though spins shortly.

Yes, there is a record on the platter when pressing Turn or Play.

Klaus

Location: Slagelse, Denmark

Favourite Product: Beosystem 3500

[Author]

Posts