Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoGram Beogram 4002 Tone Arm Won’t Drop

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #65921
    Guy Dahlke
    BRONZE Member

    I recently bought a Beogram 4002 and everything works great but the tone arm will not drop. I adjusted the balance weight as much as possible and it is close but there is still not enough force to drop. I have a small washer taped to the tone arm now which provides just enough weight for it to drop. Is there something I’m missing to help it drop?

    #65925
    Mark-sf
    BRONZE Member

    The 4002 employs both static (weight) and dynamic (spring) tracking force adjustments. With the dial at 0 you need to adjust the rear counterweight using its screw so the arm floats with 0 tracking force. Then the knob should apply the specified force by adjusting it to your cartridge’s requirement.

    #65926
    Guy Dahlke
    BRONZE Member

    Thats amazing, works perfectly now. Thanks for helping this rookie out.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.