Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums BeoWorld around the world! Deutsche Beocenter 9300 reagiert nicht mehr auf Beolink 1000/nach Batteriewechsel

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #63483
    Stefan Cologne
    BRONZE Member

    Hallo liebe Community,

    ich habe heute die Pufferbattery an meinem Beocenter 9300 (BC)ย  getauscht. Alles fein-keine “Code”-Meldung. Das BC lรคsst sich รผber die Tasten am Bedienfeld steuern aber nach dem Zusammenbau erreiche ich das BC nicht mehr mit meiner Beolink 1000. Vorher war das alles ok. Ich bin mir sicher, dass ich wรคhrend des Batterietauschs nicht in den Bereich des IR-Empfรคngers gekommen bin und etwas beschรคdigt habe. Die Beolink ist vรถllig ok. habe ich zur Sicherheit an einer anderen Anlage probiert. Kennt jemand dieses “Phรคnomen”?

    Viele GrรผรŸe!

    Stefan

    Location: Cologne
    Favourite Product: Beocenter 9300
    #63512

    Du kann mit Deinem handycamera sehen ob Deine fernbedienung funktioniert.

    Knopf auf fernbedienung eindrรผcken und durch handycamera gucken auf das IR auge, dann kannst du sehen ob es leuchtet.

     

    Location: Netherlands
    #63530
    Stefan Cologne
    BRONZE Member

    Hi Captยดn Gerard ๐Ÿ˜‰ hi Gaea,

    thanks for your message and greetings to the Netherlands!!!

    It was the lost programm. I just pressed “Sound” – “1” – “Store”.
    So if changing the battery also the Beolink 1000 can loose the connection. So its not just seeting the “CODE” back to work….

    Have a nice weekend!

    Stefan

    Location: Cologne
    Favourite Product: Beocenter 9300
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.