Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoCenter Beocenter 8500 – tape deck spindles not turning (sometimes)

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #57109
    CharlieWednesday
    GOLD Member

    I’ve had a problem with my Beocenter 8500 tape deck for a while now. I thought that a new belt would fix it but it hasn’t.  It’s the Type 1 tape deck (the one with a single belt, and 2 motors).

    It does work but it’s got an issue.  If you start to play a tape, you can see the pinch rollers turn, but the spindles don’t.  Afte a second or two, it stops.

    This can be solved if I just fast-forward or rewind for just a moment.  Once that’s been done, it will always play fine – every time.  You can then stop and start playing several times – works every time. Next day, I switch it on and try to play a tape however, same thing always happens.

    I had ordered a new belt for it anyway as it’s never been replaced, and I replaced that, but it’s only when I started to have a proper poke around inside that I realised – the belt doesn’t seem to have anything to do with the tape spindles.  It has a separate motor driving those with a little cog that moves from left to right, depending which one needs to be turning.  Replacing the belt has therefore not solved the issue (and I added a little watch oil to that cog and to the spindles, while I had it open).

    So I can play tapes, but always with this little workaround of having to fast-forward and rewind first.  Anyone familiar with the issue?

    Location: Liverpool
    My B&O Icons: No description available No description available No description available No description available No description available No description available No description available
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.