Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoCenter Beocenter 7700 back panel stuck

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #48421
    Beomaster 7700
    BRONZE Member

    Hi everyone. ย The back panel of my Beocenter 7700 is not rotating up. ย I need to replace the belts on the cassette deck and cannot access the screws that allow the unit to be opened up. ย Do not want to force it. ย It seems to be locked. ย Any advice appreciated.

    Thanks

    #48422
    Mark-sf
    BRONZE Member

    By back panel are you referring to the black grill that covers the connections? If you are it is only held by gravity. There is a stop piece attached to the underside in the middle of the grill piece that might have gotten stuck down.

    #48423
    Dillen
    Moderator

    By back panel are you referring to the black grill that covers the connections? If you are it is only held by gravity. There is a stop piece attached to the underside in the middle of the grill piece that might have gotten stuck down.

    The black grill (with sockets etc.) is held down by a plate-type bronze spring.
    Just pull up. It’ll snap free.

    Martin

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.