Home › Forums › Product Discussion & Questions › BeoCenter › Beocenter 7002 showing ! watt at start up
- This topic has 0 replies, 1 voice, and was last updated 11 months, 2 weeks ago by AntonieOos.
Viewing 1 post (of 1 total)
-
AuthorPosts
-
11 December 2023 at 08:18 #51169
Hello,
new to the forum and new to vintage bang and olufsen audio equipment. After succesfully rescueing a Beogram RX and a beocenter 2002 I now ran into problems with a newly aquired Beocenter 7002. Radio and turntable worked fine but problems with the cassette deck, basically melted belts. I changed the belts and after putting things back together teh system worked for five minutes. After that it shows a yellow/orange exclamation mark on start up with the letters’ watt’ beneath. The display does not come on and the touch panel is unresponsive. What can this be? I cannot find any information on this error code on start up
-
AuthorPosts
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.