Home Forums Product Discussion & Questions BeoCenter Beocenter 7000 Cassette – No Audio, Just Rumble

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #52551
    mjcallo
    BRONZE Member

      I am hoping someone may be able to assist. I picked up Beocenter 7000 along with the SC-70 cabinet in Rosewood. The turntable, receiver, and external inputs all work great. The cassette deck was not functioning. I replaced the belts, which had turned to sticky black goo.

      The mechanism of the cassette is now functioning perfectly. At first I had audio from the left channel and just a loud hum from the right channel. A little later, I had no audio signal. Instead, there is just hiss or rumble. It is as if it is picking up the movement of the tape across the head but not the audio information.

      Any suggestions are welcome!

      #52552
      Dillen
      Moderator

        Could be a bad relay.
        There are two, found on the large tape controller board under the turntable.

        Martin

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.