Home Forums Product Discussion & Questions BeoVision Avant 55 Over the Air Antenna

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49961
    Chasp
    BRONZE Member

      I would like to know how to install an over the air antenna to my Avant 55, since it does not have a coaxial input. Also, I can’t find a selection for antenna in any of the menu options.

      #49962
      trackbeo
      Blocked

        Sorry, if you’re in the USA, you probably already guessed: you don’t.   Connect a TiVo Edge for Antenna (or an old TiVo Roamio OTA) via HDMI to the Avant.  Other countries are different, some even including a dual tuner with a USB recording drive!  The 3 coaxial F-connectors, if you had them, would be at the top above the Ethernet jack (Satellite 1, Satellite 2, Antenna).

        #49963
        Millemissen
        BRONZE Member
          • Flensborg————Danmark

          I would like to know how to install an over the air antenna to my Avant 55, since it does not have a coaxial input. Also, I can’t find a selection for antenna in any of the menu options.

          Could it be that your Avant is a no-tuner version?

          MM

          #49964
          Chasp
          BRONZE Member

            Thank you. It’s a U.S. version. Looks like I will be going through the HDMI input on the top row of the tv.

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.