Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoMaster Adjusting treble, bass and balance on Beomaster 5000

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #42867
    JMK
    BRONZE Member

    Hi

    I have recently bought a Beomaster 5000 and hooked it up to my Beovox S45 speakers and Philips 677 turntable. The sound is a little flat and I want to adjust the bass and treble, but it seems as it can only be done from the Master Control Panel 5000. I have tried to push the ‘neutral’ button which helped a bit, but i would like a bit more bass and maybe a little less treble – especially when listening to records. Is there anything to do other than buying the Master Control Panel 5000?

    Thank you in advance

    #42870
    Tignum
    GOLD Member

    Welcome to the forum JMK. There seems to exist a ‘converter’ according to this older beoworld thread: https://archivedforum.beoworld.org/forums/p/12394/92008.aspx. Not sure if that device would also translate Beo4 or BeoLink 1000 tone adjustment signals. The manual found here does not mention tone adjustment. https://beo.zone/media/files/Bang-Olufsen-Beomaster_5000-Owners-Manual-2.pdf.
    I think Matador gives the best advice.

    Regards, Johan

     

    Location: Netherlands
    My B&O Icons: No description available No description availableNo description availableNo description availableNo description available
    #42874
    JMK
    BRONZE Member

    Welcome to the forum JMK. There seems to exist a ‘converter’ according to this older beoworld thread: https://archivedforum.beoworld.org/forums/p/12394/92008.aspx. Not sure if that device would also translate Beo4 or BeoLink 1000 tone adjustment signals. The manual found here does not mention tone adjustment. https://beo.zone/media/files/Bang-Olufsen-Beomaster_5000-Owners-Manual-2.pdf. I think Matador gives the best advice. Regards, Johan

    Thanks! It doesn’t seem to support tone adjustment. Maybe I should just buy the MCP5000

    #42868
    matador
    Moderator

    No. Only MCP5000.

    Location: Paris France
    #42869
    JMK
    BRONZE Member

    A Terminal 5000 can’t be used?

    #42871
    matador
    Moderator

    A Terminal 5000 can’t be used?

    A far as I know Terminal is only for daily operation like source selection and volume control.

    Location: Paris France
    #42872
    matador
    Moderator

    There seems to exist a ‘converter’

    Didn’t remember that one! Thanks Tignum.

    Location: Paris France
    #42873
    JMK
    BRONZE Member

    All right, thank you, Matador

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.