9000 Sledge Power Down - BeoWorld Forum

This topic has 1 reply, 2 voices, and was last updated 1 week, 6 days ago by jacek1313.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
7 February 2025 at 15:05 #63518
Jacope
BRONZE Member
Hi all,

I have three BS9000s with the same issue:

When the sledge attempts to move, the whole unit shuts down immediately. Standby LED goes dark and then comes back. Sledge jogs slightly before shutting down. Motor does work when applying 9v directly to it. See video attached.

Any ideas GREATLY appreciated.

Attachments:
You must be logged in to view attached files.

My B&O Icons:
9 February 2025 at 12:52 #63616
jacek1313
BRONZE Member
I had such a case and the soldering of one of the windings in the engine was damaged. At 9V the engine worked and at a lower voltage it stopped. The LED goes out because the BS9000 resets due to lack of pulses. The engine is quite easy to disassemble.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.