4400 tuning potentiometer - BeoWorld Forum

This topic has 4 replies, 2 voices, and was last updated 2 years, 3 months ago by Blydenstein.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
30 July 2022 at 11:36 #36477
Blydenstein
BRONZE Member
Hi

I wanted to ask if anyone knows, is it possible to repair the cord on a 4400 potentiometer, as the one on mine has broken, or do I have to replace the whole unit, if I can find one.

Also, I’m in the South east of England and wanted to know who are the best repair service, as my local “vintage equipment restorers” don’t want to touch any B&O equipment, only anything British or Japanese.

Any help would be much appreciated.
30 July 2022 at 12:52 #36478
Dillen
Moderator
This?

Martin
30 July 2022 at 12:59 #36479
Blydenstein
BRONZE Member
It was a long time ago that I looked, but from memory, that looks like the part.

I thought I’d be able to just fix the cord, but I imagine it’s not that simple.

Many thanks for the reply
30 July 2022 at 13:13 #36480
Dillen
Moderator
You can replace the cord if you are handy.

Martin
31 July 2022 at 12:18 #36481
Blydenstein
BRONZE Member
As I said, it’s been a long time since I looked at the thing inside the 4400 but it looks fairly straight forward thing to fix it ; I do remember finding a “how to” of replacing the cord because it obviously has to be done so that the settings correspond with the radio station settings.

I’ll have to see if I can find it again and give it a go.

If I do I’ll have to try and post it on here how it went.

Anyway, many thanks for your input, it’s much appreciated.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.