3400 speed adjustment - BeoWorld Forum

This topic has 4 replies, 3 voices, and was last updated 2 years, 5 months ago by Tonymaine.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
14 October 2022 at 09:33 #39805

Tonymaine
BRONZE Member

Newby to beograms but experienced lightly in other decks. Got a 3400 5726. Replaced belt still running at 32.9 RPM. Where is the fine adjustment located?

15 October 2022 at 05:50 #39806

Mark-sf
BRONZE Member

There are small knurled knobs under the black trim aligned with the speed indicators.

15 October 2022 at 07:23 #39807

Dillen
Moderator

A red fingerwheel sticks out at the rear of the operating panel – towards the platter, for fine adjustments.
A lit digit is on the panel right above it, indicating its setting. See the user manual.

Base adjustments can be accessed through holes the Beograms bottom plate.

Martin

15 October 2022 at 14:07 #39808

Tonymaine
BRONZE Member

Duh. Thanks. All good now.

15 October 2022 at 14:11 #39809

Tonymaine
BRONZE Member

Sorry. Forgot. I can only find service manual online. Is there a use manual
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.