Posts by bbrandt (archived2)
11 total posts10 results
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 13, 2017 15:24Sorry, how do I send a private email? Brian
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 13, 2017 04:46OK, I could bring it back to the shop when I have the funds to do so. I can add that my 4002 has the black pulley, which seems to be preferred. I am also willing to invest in Nick's pulley, but how do I contact him? I gu…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 12, 2017 18:38Hi Søren The belt for the arm appears correct to me. The tension is as you described. If I push down in the center, the belt compresses to almost the top of the shaft of the motor pulley post (sticking out of the black m…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 12, 2017 13:55Hi Sonavor The Analogique service was in August 2016, because the arm didn't move (it was a broken belt), and here is what was performed: Replaced belts Replaced lamp(s) and/or LED(s) Replaced capacitor(s) Traced located…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 11, 2017 21:33Today the problem has worsened. The arm will not move to the edge of the record to begin play. I have to send the arm back to rest by using the Stop button, but even then it doesn't go completely to rest and turn off. I …
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 11, 2017 00:46The photo was pasted in, but it looks like it didn't post. Is there a trick to posting photos? The info on the tag is: GR 4002 SLUTAFRØVNING No. 1189015 TYPE 5513 Thank you Brian
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 11, 2017 00:43This is the tag underneath. If you need inside photos, let me know what you would like to see. When I last reassembled it, the panel on the right, behind the buttons, seems to have gotten stuck. I don't want to have to f…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 10, 2017 23:35I played a few more LPs watching at the end to lift the arm before it gets to the label. But the last LP played, the arm did not go fully to rest, stopping before it did with a grinding noise. I gave the assembly a gentl…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 10, 2017 22:33Thank you Sonavor. I am not able to get under the turntable at the moment to check the type. Here are a few things that have happened or been discovered: - The TONEARM TRANSPORT pulley is not loose and the belt is new. I…
B&O 4002 turntable issues
in Imported Content (Unmapped) · Apr 4, 2017 16:33My 4002 turntable sometimes makes loud squeaking noises while playing (from motor area?). Also the arm sometimes squeaks when moving, especially at the ends of travel. Sometimes it doesn't come to a full rest when return…