Posts by Armbored (archived2)
16 total posts14 results
Beocentre 4600
in General Discussion & Questions · Mar 30, 2017 16:57Hello Martin and all, I thought I might hijack this thread as I having exactly the same issue with a BC4600. Record player works perfectly, tape deck works. Not sure about the tuner, I would guess so. When I turn it on, …
Beogram 1600 arm cueing problem
in BeoGram · Mar 30, 2017 11:44Hi Martin, Did you get my email from last week about the belt? I've not heard from you. My email is michael.hendry1@gmail.com Thanks in advance, Mike
Beogram 1600 arm cueing problem
in BeoGram · Mar 20, 2017 11:53Thanks Martin, Do you supply parts? I seem to remember this from some time ago. Regards Michael
Beogram 1600 arm cueing problem
in BeoGram · Mar 20, 2017 08:26Thanks Martin, Any thoughts on the high speed rotation? 70rpm at times, an intermittent problem. Michael
Beogram 1600 arm cueing problem
in BeoGram · Mar 19, 2017 22:20I worked out the tonearm is the same as on the Beogram 2200, so downloaded that manual. There, I found out that the above mentioned screw is for balancing the tonearm. So I balanced the tonearm and set the tracking weigh…
Beogram 1600 arm cueing problem
in BeoGram · Mar 18, 2017 22:35Hello Martin, I've just had a close look at what's happening. When the arm comes across over the record, it lowers but does not make contact with the vinyl. The anti skate then brings the arm back to the rest position. I…
Beogram 1600 arm cueing problem
in BeoGram · Mar 18, 2017 22:31Hello Martin, I've just had a close look at what's happening. When the arm comes across over the record, it lowers but does not make actual contact with the vinyl. The anti skate then brings the arm back to the rest posi…
Beogram 1600 arm cueing problem
in BeoGram · Mar 16, 2017 22:44Hello Martin, Yes there was a cartridge on the tonearm. During the cleaning process, I removed the counterweight as the whole turntable was very dirty. I had not replaced it properly in the arm and I think this was the p…
Beogram 1600 arm cueing problem
in BeoGram · Mar 16, 2017 22:44Hello Martin, Yes there was a cartridge on the tonearm. During the cleaning process, I removed the counterweight as the whole turntable was very dirty. I had not replaced it properly in the arm and I think this was the p…
Beogram 1600 arm cueing problem
in BeoGram · Mar 9, 2017 11:29Hello all, Just looking at a 1600 for a friend and finding a problem with the arm cueing. Functions as follows: Press 33, the platter turns. The arm swings over the record to the first track but does not lower. The arm s…
Beocenter 500 manual
in General Discussion & Questions · Feb 28, 2017 12:30Hello there, I currently have a Beocenter 5000 to look over for a friend and I am looking for an operating manual. Is anyone able to help? Thanks in advance, Mike
Beo 1900
in Imported Content (Unmapped) · Feb 10, 2016 16:01Martin, I'm talking nonsense, sorry.... It's a 2200, I just checked. Is this a common problem with those? Regards Mike
Beo 1900
in Imported Content (Unmapped) · Feb 9, 2016 22:21Hello Martin, I have been restoring turntables for a few years and someone has given me a Beogram and Beomaster 1900 to try and rescue. The Beogram I have tinkered with and cleaned up, more or less happy with it, but som…
Upgrading from MMC4 to MMC2 disappointed.
in BeoGram · Feb 9, 2016 22:13For what it's worth, some cartridges take some time to 'bed in', some say about 50 hours. Sonavor, Strange that the volume should be different when the output is the same from both carts. Must be the different system? Re…