Posts by mcgarrke (archived2)
13 total posts13 results
Beomaster 5500 + MCP Issues
in Imported Content (Unmapped) · Jan 22, 2016 22:10Anyone know why a beomaster 5500 will come on and cut out and flash an F letter?
Beogram 400x projects
in BeoGram · Jan 20, 2016 22:06This has been an amazing thing to read and see, I'm truly startled by your dedication to this beogram 4000. I have done many beogram lids and have made really poor lids look so much better, even getting many scratches ou…
Beogram 400x projects
in BeoGram · Jan 20, 2016 21:15HI I may need to get the logic circuits checked in my Beogram 4000, are the ares highlighted in green responsible for the solenoid and tone arm lowering function? thanks Kevin
Beogram 4000
in BeoGram · Jan 20, 2016 20:48hey Martin I will have a search for that, is it just a case of going into his tab?
Beogram 4000
in BeoGram · Jan 20, 2016 20:02Beogram 4000
in BeoGram · Jan 20, 2016 20:02Beogram 4000
in BeoGram · Jan 20, 2016 19:49[quote user="Dillen"] Yes to the panel. Yes to belts. No to alu strips, that's Frede of Classic Audio. Martin [/quote] Stripped the control panel and they points were very tarnished but the up and down etc cleaned and th…
Beogram 1203 part replacement
in Imported Content (Unmapped) · Jan 19, 2016 22:17i have a beogram 1203 and the tone arm moves further than the lead groove, i tried turning the screws underneath for 30, 25, 17 but it swings too far in. i note that it also does not return at the end of a record in time…
Beogram 4000
in BeoGram · Jan 18, 2016 22:47Hi Dillen do you mean the operator panel the silver square panel up down/ left right? Also are you Dillon that you can get belts for systems such as cd 50 and also aluminium strips for Beogram 4002 lids? Thanks Kevin
Beogram CD 5500 tray doesn't open
in BeoGram · Jan 18, 2016 21:04hI did yo get the BG cd 50 working, can i ask is the loading belt and drawer connected with the laser operation, i noticed my belt is broken last night it was a set i was given, i corrected the loading drawer which was a…
Beogram 4000
in BeoGram · Jan 18, 2016 19:11hi again Sounds like you have a lot more wrong with your BG 4000, the strange thing was mine was working away great but without and incident it just stopped lowering. I've taken the switches board out to finely sand betw…
Beogram 4000
in BeoGram · Jan 18, 2016 17:19Hi Sonavor, thanks for the reply. I did exactly as you said, had seen Beolover before and watched again, i used a little micro mesh to get to the points on the limiter switch, the switch itself is making contact, it is s…
Beogram 4000
in BeoGram · Jan 17, 2016 20:30Hi my begrime 4000 was working fine but then suddenly it stopped lowering, in not sure the most likely causes but is there a list of A-Z for most likely trouble, it seems there is no activity from the solenoid, its not c…