Beomaster 3300 volume will not increase, stays only low volume

in Imported Content (Unmapped) · Dec 4, 2012 00:33 GMT

I've got the same problem, did you get it sorted out and, if so, was it expensive?

Beogram 3000 restoration

in BeoGram · Dec 3, 2012 13:55 GMT

Thanks Martin 🤩

Beogram 3000 restoration

in BeoGram · Dec 3, 2012 13:30 GMT

SUCCESS! She is working like a dream! Thanks!

Beogram 4002 renovation

in BeoGram · Dec 1, 2012 22:08 GMT

Haha,...... it's not happened yet but when it has I'll post a pic!! Am busy with other projects right now :-)

Beogram 3000 restoration

in BeoGram · Dec 1, 2012 22:06 GMT

Thanks Soren, I have checked the fuse in the plug and it's OK as I have also checked the continuity of the cable carrying the mains current and all are working correctly. Also the fuse in the Beogram is good, as is the s…

Beogram 3000 restoration

in BeoGram · Dec 1, 2012 15:55 GMT

I bought this cheap from a local guy and other than it having a missing stylus (although with a MMC4 cartridge) the only other problem was that it wouldn't power up, I've had a multimeter on it and cannot detect any kind…

Beogram 4002 renovation

in BeoGram · Dec 1, 2012 15:37 GMT

Hi Folks, just a quick update on this project. Completely by chance I found a solution on EBay where a seller was disposing of PCB from a Beogram 3000, complete with it's power supply, and I couldn't believe my eyes when…

Beogram 4002 renovation

in BeoGram · Oct 5, 2012 20:31 GMT

Thanks Martin and Soren for the suggestion. I think I have already looked at 1 million microswitches on the WWW and there are a few that might fit but the problem could be the alignment...... anyway thanks again....... I…

Beogram 4002 renovation

in BeoGram · Oct 5, 2012 07:34 GMT

Thank you Martin. The more I look into the remains of this turntable the more broken bits I find. Perhaps there are still more to find :-) I will certainly try to remove the broken switch and rebuild it....... what would…

Beogram 4002 renovation

in BeoGram · Oct 4, 2012 22:48 GMT

Thanks for that Peter, perhaps Martin will comment if he has seen the posting.

Beogram 4002 renovation

in BeoGram · Oct 4, 2012 13:11 GMT

Hello.... first time poster here, please be gentle with me! I recently bought a Beogram 4002 type 5504 s/n 305887 which was working (but not correctly) and the basic problem seems to centre around the PCB controlling the…