Posts by kammeri (archived2)
59 total posts43 results
BeoVision 11 sound output issue
in General Discussion & Questions · Jul 1, 2017 19:51Hi! Our BeoVision has an erratic, yet annoying sound output issue. The TV is hooked up in a 5.0 setup with BL5's as front speakers. We have used diverse speakers as rears. When setting up the system everything works fine…
Beocenter 9000 Tape issue (fully functional but no sound)
in Imported Content (Unmapped) · Oct 15, 2016 16:23Hi! After a few years lack of use the tape deck of our BC9000 produces no sound at all. I have checked the tape pulleys and capstans which work perfectly. There are no visible curls on the tape. There is no sound from ei…
BeoSound 1 shuts down after a few seconds
in Imported Content (Unmapped) · Jul 22, 2016 21:14Gentlemen, The subject pretty much states the issue: our BeoSound 1 is "working" as it should in STBY mode. The antenna is moving, setting and viewing the clock is normal etc. However, when switching on the tuner or CD, …
beosound 1 question
in General Discussion & Questions · Jul 16, 2016 21:57Hi! It is not a PIN code issue since that feature has been disabled and there is no indication of a security lock-up via the LED display. Thank you for bringing it up though! I would suspect it has something to do with t…
beosound 1 question
in General Discussion & Questions · Jul 15, 2016 21:04Reviving this thread since our BeoSound 1 is experiencing the same kind of behavior. The BeoSound is in standby mode normally. The antenna, clock etc standby functions appear normal. Even the CD and radio randomly functi…
BeoCom 2
in General Discussion & Questions · Dec 20, 2015 01:24[quote user="valve1"] To clarify; You are missing the transformer and trying to bypass it ? [/quote] Partially yes. I don't have the original power supply and I am probably not going to get one. I am trying to find out t…
BeoCom 2
in General Discussion & Questions · Dec 18, 2015 21:16Gentlemen, I tried this question already at the workbench with no luck. The issue is I am lacking the original power supply for my BeoCom 2 combined base station. Does anyone have information regarding the pinouts of the…
BeoCom 2 - connector pinout
in Imported Content (Unmapped) · Dec 7, 2015 14:28Gentlemen, I am lacking the original power supply of a BeoCom 2 combined base station. Does anyone have information regarding the pinouts of the BeoCom 2 base station cable (Mk 1)? There are two connectors on the cable. …
Beosound 3200 and wireless 1 won't connect to Beolab 3500
in General Discussion & Questions · Nov 6, 2014 20:32Hi, Are you certain that your Wireless 1's have the more (or most) recent firmware? The firmware was updated at some point to add the wireless ML capability. The initial purpose for the WL1 was to be connected via ML at …
BeoPlay V1 serious picture quality issues after software update (1.0.7.36015)
in General Discussion & Questions · Sept 27, 2014 21:03Dear members, Our BeoPlay V1 (40") started producing a horrendous picture after the latest software update released September 3rd 2014. After the update the picture turned grainy resembling a bad overly packed MPEG. Also…
Beolab 5, software.
in General Discussion & Questions · Aug 16, 2014 23:44[quote user="Vienna"] [quote user="MARKFS"] Does anyone know, if there is a big difference between 2.61a and 3.10a? [/quote] No sound or functional improvements in SW 3.00a / 3.10a /3.20a (compared to 2.61a) - Just neces…
Beolink wireless 1 from mac to 9000?
in General Discussion & Questions · Aug 14, 2014 16:47[quote user="hfat"] Beolink wireless is made to have a wireless masterlink connection, not for connecting speakers or audio-aux links wirelessly. So I'm afraid it will not work as you intent it to use. hfat [/quote] Actu…
PowerLink to RJ45 pinout
in General Discussion & Questions · Jun 21, 2014 15:18Gentlemen, I'm feeling a bit puzzled right now. There seem to be several versions of pinouts online regarding the RJ45 to PL connection. So far I have tried the one presented here in this forum by Keith (January 12th 201…
Beolab Penta III display
in Imported Content (Unmapped) · Jan 25, 2014 20:57In this case the cables are not the culprits, thus the same cables have been in use for half a decade with the displays working. Last time the Mk2 displays stopped working was due to dried out capacitors on the pcb. They…
Beolab Penta III display
in Imported Content (Unmapped) · Jan 24, 2014 20:43I just swapped the mk2 display back into one of the speakers to troubleshoot the inoperability of the mk3 displays. Strangely enough, now even the mk2 displays have stopped working, which worked fine previously. The Pent…
Beolab Penta III display
in Imported Content (Unmapped) · Dec 30, 2013 00:57Gentlemen, The display PCB's in the II's and III's are (as previously mentioned) in fact very different, the II being the more sophisticated one with an ambient light LDR etc. The connection from the amplifier to the PCB…
BeoPlay V1 - External USB Memory Issue
in General Discussion & Questions · Aug 17, 2013 22:45The drive does not have an external power supply, it powers and spins up when connected to the V1 though. I assume the V1 USB port aught to have atleast the same output power as a MacBook Air. The Drive itself is a Seaga…
BeoPlay V1 - External USB Memory Issue
in General Discussion & Questions · Aug 17, 2013 09:49I just checked the external drive. It is a 5400 rpm 2.5" 500GB drive, which is NTFS formatted. (I mistakenly recalled it to be FAT formatted.) The drive works flawlessly with any laptop I have tried it with, but the V1 i…
BeoPlay V1 - External USB Memory Issue
in General Discussion & Questions · Aug 4, 2013 23:19Thank you! I will certainly give it a try. Just to make sure: are you certain the 1TB drive on the V1 was connected to the USB port, not the RJ45 (i.e. making it a NAS drive)?
BeoPlay V1 - External USB Memory Issue
in General Discussion & Questions · Aug 4, 2013 21:04Gentlemen, After few weeks of mixed feelings (no, not getting deeper into that) with the V1, it seems the unit is unable to handle larger memory devices connected to the USB port. The initial goal was to hide away an ext…