Posts by dtjoint (archived)
18 total posts13 results
Beocord 8002 with no sound output
in The Workbench · May 6, 2009 20:15Hi guidovangool , Thanks for your suggestions. R@ does appear to be bad and I will check D13 when I can figure out how to get the tape mechanism functioning properly again. Jerry
Beocord 8002 with no sound output
in The Workbench · May 6, 2009 20:13Hi Geoff, Thanks for the detailed recommendations. I was able to follow them and could determine that the head appears to exhibit the correct resistance both at the head itself and at the connector. The probes at ends of…
Beocord 8002 with no sound output
in The Workbench · May 2, 2009 21:51Hi Geoff, Thanks for your help! I'm not sure where to pick up signal ground to test voltage on pins 1 and 2 of connector 9 on board 2, I just don't have much experience with such. What should I see in the way of signal v…
Beocord 8002 with no sound output
in The Workbench · May 1, 2009 16:47Hi all, I finally received my new-to-me 8000 system (beomaster 8000, Beocord 8002, Beogram 8000, two rosewood M100 (huge!) and four rosewood wall hanging P45s. All the components are in excellent cosmetic condition but I…
Rather long response the the underlying issue of whether or not a sub woofer does or does not improve the sonic experience
in North America · Apr 19, 2009 23:58Hi all, Seven years ago my wife and I purchased a 1907 Masonic Temple building in historic Kerby, Or, on the west coast of the US. We remodeled and restored the building into my studio and gallery on the first floor wher…
4500, two questions
in North America · Apr 12, 2009 10:32Hi, Most helpful, thank you. Mine appears to be a one way unit as I see no transmitters under the glass, only behind the IR cover at the lower left to the left of the head phone jack. I did get the tape unit working prop…
4500, two questions
in North America · Apr 11, 2009 12:47Thanks, I did find the correct manual there and it has been most helpful! I now understand how the unit works (I think) and how to make the necessary settings to get everything to work properly. I appreciate your help. B…
4500, two questions
in North America · Apr 11, 2009 10:52Thanks, that did it, but the display appeared to showed OP 1.5 rather than just OP 1 briefly. Without a manual these things are hard to intuit. In the files section the only manual listed for this unit is one written in …
4500, two questions
in North America · Apr 10, 2009 22:21Hi all, We are back from our travels and found the new 4500 system waiting for us. The units are superb cosmetically. The receiver sounds great and seems to function in all ways save one. It does not seem to respond to a…
Poor Sound Quality from S120.2 Speakers!!!
in North America · Mar 21, 2009 15:23Hi Piaf, I have those same S120-2 speakers and they do not sound at all like what you describe. Mine, driven by a 3300, I would describe as very smooth and true. Good bass, but not at all booming and very even mid and hi…
Suggestions on best CD player to use with BM8000
in General Discussion & Questions · Mar 14, 2009 21:56Hi all, I have fallen down the long slippery slope into B&O oblivion. For the last few years my wife and I have been restoring and remodeling a 1907 Masonic Temple building in the near ghost town of Kerby, OR, on the Red…
Can 2000 tape mechanism be used to replace a bad 3300?
in North America · Jan 22, 2009 12:57Hi Martin, I found a replacement 3300 tape mechanism from one of our forum members so now I need the belts from you. Can you please pm me (glwork@mac.com) with the price and shipping charge to USA zip 97531. Thanks. Jerr…
Can 2000 tape mechanism be used to replace a bad 3300?
in North America · Jan 19, 2009 11:21Hi, Newby first post here. I purchased a Beocord 3300 which the previous owner represented as working well but sold it "as is". It turns out it did not. The belts were rotted off and the motor no longer functions. Can I …