Posts by Imax5353
35 total posts27 results
Beocenter 7700 Issues
in BeoCenter · Mar 2, 2025 19:55Well good news/bad news. Back at this after fixing a Beomaster 2400 and Beogram 1800. Got the left channel good (transistors), and able to adjust the no-load to 10 mV. TT and AUX play well, however no left channel on rad…
Beomaster 2400-2 Volume weirdness
in BeoMaster · Mar 1, 2025 19:22Well pretty easy fix. Replaced 3IC1 (CD4011) and issue is solved!
Beomaster 2400-2 Volume weirdness
in BeoMaster · Feb 20, 2025 00:46Hello, picking up on my Beomaster 2400-2 2901. After new bulbs and recap The volume control is exhibiting odd behavior: When pressing Down, ~50% of the time the volume increases, as does the Up light. Up is always up. In…
beomaster 1900 no 15v supply
in BeoMaster · Feb 15, 2025 20:16For my beomaster 2400, the 15v transistor 2TR27 that connects to the IO planel on the bottom was grounded. The plastic ring that isolates it from the screw wasn't seated properly
Beomaster 2400 15V tr27 temp
in BeoMaster · Feb 14, 2025 22:38Quick question, after a successful recap and new bulbs on my 2400, I noticed that the 15V transistor (2TR27) runs at 54C/133F at the I/O plate. I just wanted to check if this is normal or I have to do a post op. I did ad…
Beocenter 7700 Issues
in BeoCenter · Feb 6, 2025 03:21For the left channel, I'm thinking it's the Darlingtons, which I'll have to order. Tape has a broken peg on the back supporting an idler wheel that is snapped, and the FF solenoid is not engaging in FF or play. P6 cog is…
Beocenter 7700 Issues
in BeoCenter · Feb 4, 2025 22:47I havent updated in awhile, but have made progress. I should have taken a holistic view from the top. I realized that most of the issues were all on the 15V power, and after testing connections I found that a trace on bo…
Beocenter 7700 Issues
in BeoCenter · Jan 24, 2025 01:41Well after 2 years, I'm back at this. I got the right caps in, but the same issues, system turns on, can select all the sources but no sound. All display segments are good, but cant tell about the level meter. I adjusted…
Beocord 8004 Preemptive Service
in BeoCord · May 24, 2024 05:19Hello, I recently picked up a lot of 4 Beo items, and am tackling the Beocord 8004 first. Belts had predictably melted, and the only other obvious issue is the broken plastic holding the leaf spring on the feed reel, I h…
Beocenter 7700 Issues
in BeoCenter · Nov 10, 2022 16:10After getting a good look, and waiting for parts, someone had been in there before and replace a few of the caps. I replaced the powerboard caps and rectifier, hoping for the best, but no dice, and also discovered that t…
Beocenter 7700 Issues
in BeoCenter · Oct 31, 2022 17:11The processor check shows P O, so I'm assuming its good. I'm out of town, so should be able to get a look at it soon.
Beocenter 7700 Issues
in BeoCenter · Oct 29, 2022 05:46Hello everyone, I just snagged a Beocenter 7700 that has issues, and just wanted to check here before I delve too far. So, it power on and the main display shows, however everything else is dead, the P6 dial lights up, b…
HD input on Avant 32
in General Discussion & Questions · Mar 8, 2017 17:57So might it be that I just have to set the Tivo output to 480p? I assumed it would auto-output. Or with the Avant picture (gorgeous BTW) 480p isnt that much better than 480i. Funny, I've never seen another product with t…
HD input on Avant 32
in General Discussion & Questions · Mar 8, 2017 15:42I'm wondering if anyone has any advice on connecting HD component to a 32" Avant (US spec/no SCART). I see 2 HD options (RGB(5 connectors/YPrPb (3 connectors) I've tried a Tivo and DVD player, both of which have the stan…
Beovision Avant 32 CRT
in Imported Content (Unmapped) · Mar 25, 2016 15:31No problem, "burn in" is when a picture is left on a screen for too long, and it the phosphor pixels keep a part of the image "burned in" to the screen. I will try the tv-av-tv. I had tried to find the p-mute function on…
Beovision Avant 32 CRT
in Imported Content (Unmapped) · Mar 6, 2016 23:21I did! And the sound is great. I love the motorized stand. Has anyone who has used it for just music done anything about possible burn in for the CRT?
Beovision Avant 32 CRT
in Imported Content (Unmapped) · Mar 5, 2016 21:44I checked that bar is on solid piece. I'm not complaining, I don't have any tapes, just thought it was interesting as I thought they all had either a DVD or VCR. The projector out is kind of neat, it'd be cool if there w…
Beovision Avant 32 CRT
in Imported Content (Unmapped) · Mar 5, 2016 17:30Picked it up today and it is gorgeous! And heavy. Everything seems to work, although I haven't used all the inputs yet. I was pleasently suprised that it had Toslink, as i was worried it only had digital coax. Manufactur…
Beovision Avant 32 CRT
in Imported Content (Unmapped) · Mar 2, 2016 03:13A neighbor has one of these with the Beo4 selling for $200. I'm wondering if it is worth it, being CRT and if what kind of screen quality it has. Thanks, Max
Beomaster 3000
in Imported Content (Unmapped) · Feb 29, 2016 20:46It has never come on even with ipod conneced through tape or phono.