Posts by ProGram
530 total posts495 results
BeoGramCD 6500 with focus issue ??
in Imported Content (Unmapped) · Feb 23, 2022 08:15I’ve had a strange focus issue, too. Take a very close look at the laser lens. The neodymium magnets may have developed some needles which fills the magnetic gap.
Beogram 4002 / Refurbished
in Imported Content (Unmapped) · Feb 17, 2022 11:20Ich finde keine einzige Pressemitteilung auf bang-olufsen.com
Beogram 4002 / Refurbished
in Imported Content (Unmapped) · Feb 17, 2022 08:33Wo wird das angeboten, und was beinhaltet das? Interessiert mich mal.
BeoGram RX2 No Output - Suggestions where to start troubleshooting
in BeoGram · Feb 8, 2022 08:11It’s clear that the tone arm wires are interrupted somewhere. They are very thin copper wires.
Why B&O over Apple or Sony?
in General Discussion & Questions · Jan 28, 2022 08:23The first impression is always the appearance, the design. Much of black glass and aluminum. Just my taste. But for me they have much of technical aspects which are innovative sometimes. HX-Pro and the computer controlle…
MCP 5500 Micro switch
in Imported Content (Unmapped) · Jan 10, 2022 11:19Take one of those micro switches and discard the spring blade https://wirsindspiele.de/de/automaten/Musikboxen/ersatzteile-musikbox/nsm/mikroschalter-umblaettertaste.html
Beomaster 5000 + Beogram 5500 issue
in General Discussion & Questions · Dec 16, 2021 04:24You know about the 7-pin connector. It would be possible that the core is broken or the solder is broken. Or it's not connected at all.
MX6000 problem with SCART
in Imported Content (Unmapped) · Dec 15, 2021 11:10Hi, they suffer from cold solder joints, especially on the board with all the sockets on it.
Beomaster 6XXX / Beocord 6XXX Display red coating
in General Discussion & Questions · Dec 6, 2021 08:13What about the red (and green) foils which are fitted in the old 3-D glasses
Beomaster 6XXX / Beocord 6XXX Display red coating
in General Discussion & Questions · Dec 6, 2021 06:40Very well done! Until now I used the pure paint KARMIN for repair the display of some Beocenters and MCPs, which are only letters and digits but not those wide areas with even coating.
Beocord 8004 - Left channel missing
in Imported Content (Unmapped) · Nov 18, 2021 09:24[quote user="notwist"] But those are 'naked leds' and resoldering them is likely a lot more work than actually installing new leds. [/quote] Oh sorry, that was not clear enough. I spoke of the wire, which you may try to …
Beocord 8004 - Left channel missing
in Imported Content (Unmapped) · Nov 18, 2021 08:55I don’t remember the pcb number, but you need to take off the glass. Simply slide the bar between the glass and the aluminum to the right. Then the glass is loose
Beocord 8004 - Left channel missing
in Imported Content (Unmapped) · Nov 18, 2021 08:21The led problem seems to happen with nearly every display with those big digits. I renewed the leds in my Beocenter 7700. The new leds were much brighter, so I had to adapt the resistors for lower current. The original l…
Trying to repair a Beosystem 2500 - trouble with the metalic rope
in Imported Content (Unmapped) · Nov 9, 2021 06:06It looks as if the rope missed the rollers at the right sides
Time to replace my stylus?
in BeoGram · Nov 7, 2021 07:04The tracking force doesn't change by itself. But how long is the time, it sounded fine and now? Pushing the tone arm means to let the cantilever with its suspension swing back to the right angle.
Time to replace my stylus?
in BeoGram · Nov 6, 2021 06:532 suggestions: the needle tip had fallen off. This can be observed under a microscope, or the suspension of the cantilever got loose. You may try to give the tonearm a little push down to the record while playing. And ye…
Beomaster 6XXX / Beocord 6XXX Display red coating
in General Discussion & Questions · Nov 3, 2021 08:12I think I bought an earlier version of this paint https://www.hobbyshop.de/epages/64593168.mobile/de_DE/?ObjectPath=/Shops/64593168/Products/4806_1 Must be color “karmin”, as far as I remember
Help with a Beocenter 4600 turntable
in Imported Content (Unmapped) · Oct 6, 2021 08:18Just bent the longer part with a pliers as much as the one side pushes the other and the white lever can separate them.
Help with a Beocenter 4600 turntable
in Imported Content (Unmapped) · Oct 5, 2021 11:36The switch (2. Picture) should be closed in this position. The red arm of the switch is pushed by the white plastic lever when shut off.
Beogram 2000 Tonearm Height.
in BeoGram · Jun 11, 2021 14:05You may have to disassemble the tonearm. I've had both broken hinges, which I replaced with some aluminium. It works quite well.