Thank you to our Sponsors
Hello everyone,
I have a Beomaster 5 with a pair of Beolab 9000s connected via Powerlink. In the same area, I have Loewe TV with a cinch audio out, that I would like to have as an aux audio in on the BM5.
Reading up on the forum I understood I need to use the Masterlink connection on the BM5 to achieve this lag-free. This would require:
- a cable RCA -> Beosound aux input (
Steve's last post in this thread covers it: /forum/imported-unmapped/how-to-feed-audio-from-smart-tv-to-beomaster-5
And the Powerlink socket on the BL converter is an input rather than output, but you don't need to use it in your proposed setup. The only connection that you require between the converter and your BM5 is a masterlink cable.
Location: Warwickshire, UK
My B&O Icons:
So the BL convertor has an identical Masterlink connection, and I use a ML male-male cable to connect it to the BM5?
So the BL convertor has an identical Masterlink connection, and I use a ML male-male cable to connect it to the BM5?
Yes and yes! 😁
You can see the connections here:
Location: Warwickshire, UK
My B&O Icons:
Amazing, that makes my life easy! And to bring up this input on the BM5/BS5, I just switch it to A AUX?
No. You select it using the 'TV' button on the Beo4 remote. This may seems illogical but you'll have to trust us!
Location: Warwickshire, UK
My B&O Icons:
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member