- Damaged spring for the CD spindle
- Anyone know how I could repair this?
- Missing feet
- Anyone know of a replacement?
- CD door does not open
- Motor runs
- Door does not open more than half way using the manual screwdriver method
Beocenter 9000 + Beovox CX100
10 replies
I recently got a Beocenter 9000, Beovox CX100 and Beolink 1000.
Beolink seems to work fine, just needs a clean
CX100 need refoaming as they are totally perished
Beocenter 9000 operates, but has a few problems
Maybe have a look at this thread for some help with the doors - the BC9000 has the same system as the BC9500:
link
Whilst you have it apart I would replace the door motor drive belts, the backup battery and probably the tape deck belt(s).
EDIT: CD spindle was discussed here: link
link
Whilst you have it apart I would replace the door motor drive belts, the backup battery and probably the tape deck belt(s).
EDIT: CD spindle was discussed here: link
Location: Warwickshire, UK
My B&O Icons:
I opened the unit and spotted a CD spindle spring trapped beneath the CD player.I carefully removed the drive and the spring was intact along with the cap. So I have a spare cap as well now :-) Login to view image
Hi Paul - well done with the spring!
Was my earlier post of any value?
Was my earlier post of any value?
Location: Warwickshire, UK
My B&O Icons:
Hi Guy,
Yes it was,thank you. I think my problem with the CD door is that the cord seems to have been lubed in the past which is causing it to wrap over Itself.
I upgraded my account to silver, but I can't find where the service manuals are on the site. Any chance you could point me towards them please?
Yes it was,thank you. I think my problem with the CD door is that the cord seems to have been lubed in the past which is causing it to wrap over Itself.
I upgraded my account to silver, but I can't find where the service manuals are on the site. Any chance you could point me towards them please?
Yes it was,thank you. I think my problem with the CD door is that the cord seems to have been lubed in the past which is causing it to wrap over Itself.Yes that was the problem with mine. I did try to clean the cord but in the end I had to replace it with a new 'dry' one.
I upgraded my account to silver, but I can’t find where the service manuals are on the site. Any chance you could point me towards them please?Two places: Via Main Beoworld Site 'Products' page (older, but currently more extensive library): And to the right of the current forum (yet to be fully populated):
Location: Warwickshire, UK
My B&O Icons:
Got the manual, thanks. Where did you get your cord from?
Where did you get your cord from?Luckily I had a door string repair kit that I purchased by chance many years ago - I show a picture of it (including the part number) in this post: I doubt that you will find a repair kit now, but you could give
Location: Warwickshire, UK
My B&O Icons:
I cleaned the string with some waterbased degreaser in an ultrasonic bath, and it now works well.
I replaced the lithium battery, but I now need to replace the capacitor on the CD as it has some strange behaviour
I replaced the lithium battery, but I now need to replace the capacitor on the CD as it has some strange behaviour
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member