Hello,
My Beogram 4002 has a late response on the click relay for the silent switch. When the arm is already on the record after a 2 seconds the relay turns open and than it is fine but it is a little bit over time.
Can i set adjustment for that?
Thank you to our Sponsors
Beogram 4002 silent click relay late response?
6 replies
Hi, or does the arm lowers too fast? That move should take about 1 sec.
Looks normal to me?
According to my service manual "Adjust 8R2 to admit passage of pickup signal between 1 and 2 disc revolutions after pickup has been lowered"
You may want to clean 8R2 first.
Jim.
By the way: one revolution (33.33) takes about 1.8 sec. So it's really ok, what your deck does. I didn't realise that.
Hi, according to the service manual is suppose to be ok, as ProGram has been mentioned already.
In an other hand you could place a multimeter and set 63,8K ohms on this trimmer (8R2), this match to the right indication of the service manual, this is my workflow.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member