Wow and Flutter on Beogram 5500

[paul-mck]

Hi,

Have been using my Beogram 5500 quite a bit and recently started hearing a sort of quiver when playing a jazz record, I then tried some other albums and heard the same sound, which I believe is called Wow and Flutter.

Given that the LP is fine, the platter is level, I guess it must be down to either the belts on the deck or the stylus.

Am I correct in this? If so is there any advise on swapping out the two belts (band type and smaller round type for arm)

Any help would be gratefully appreciated.

Thanks

Location: NY 11238

Favourite Product: Beogram 5500

[TK]

A tired belt may not be your exact cause, but I’ve solved the wow problem before by simply using a slightly tighter/new belt.  Consider also removing the platter and check for anything which may be rubbing against the pulley – wires, gears, etc.  If you remove the belt and spin the platter clockwise it should spin freely without any rubbing noise for a considerable length of time.

If none of that works, I’d imagine that you’ll have to start looking at the PCB voltages. There are probably others more seasoned than myself who can advise.

[Author]

Posts