Beogram 2400 – a generic question

[Wojciech Herchel]

Hello,

 

I have recently acquired a Beogram 2400, which happens to be working beautifully – one thing that is weird is that the turntable body moves up and down (together with the tonearm) in the chassis – or it bounces, if you will… is this intentional, or is there a screw missing somewhere fixing the actual turntable to the chassis such that it does not move?

[Mark-sf]

Nope, the bounce is intentional to prevent acoustic feedback. Enjoy your new purchase!

[Wojciech Herchel]

Thank you.

Second question I have that the stylus has a tendency to drag over the record a bit – particularly on the new/modern record – when it returns to home after finishing the record or pressing Stop – is it an easy adjustment? The stylus force is set at 1.5gr, it is a MMC20E. anything else that needs adjusting?

[Mark-sf]

If you remove the counterweight you will see a screw that adjusts the tonearm height when it is cued up. This should be 5mm above the record surface.

[Author]

Posts