Using BeoV 6-22 as speakers?

[matador]

Hi,

Not BV6-22 but I’ve got a BV6-26 (actually a BC6-26).
I’ve also around the house BL4000, BL8000, BL6000 and some third party Airplay speakers.
Between all, best and amazingly sounding to my ears are: ex-æquo BL4000 and BC6 and all the rest far after.

Now I believe BV22 and BV26 have different speaker setup (one way vs two way) but anyway, what I want to say is those thing have to be seriously considered. And also they could be very usefull for more that just sound.

Hope this helps.

 

Location: Paris France

[Madskp]

You do not mention if you have a Masterlink network where the Beovision 6’s are connected to?

The Beovision 6’s could be connected to the Avant via NL/ML converter and and play sources from the Avant that way. If you do not allready have it you may need some cabeling for this to work.

Location: Denmark

[JPurvis]

Thanks so much for replies. I used to have a ML cabled set up but now have by 6000s connected through networking and RJ45 connectors (apart from 1 and the Beolab 2 on a wisa receiver/ adaptor). I don’t really have the ability of doing more cabling so I guess was wondering a non cabled solution but I suspect this would be impossible.

[Madskp]

Ok, just so you know if you do have network cabling near the Beovision 6’s you might also be able to use that as Masterlink cabeling. Alternativly the NL/ML converter can be placed with the TV’s and the network cabeling can be used as network

Location: Denmark

[Author]

Posts