BeoCenter 7000 turntable cover hinge Or spring holder

[guileukow]

Hi All,

I had the same issue on my Beocenter 7007 turntable hinge that was continuously falling like described in this archived thread: https://archivedforum2.beoworld.org/forums/t/37193.aspx

It’s not a question that I have but more an answer to those looking for a solution, hence I’m launching this topic for the record.

I made a 3D model that you can print to address this issue:

https://www.thingiverse.com/thing:6794011

It’s not too difficult to assemble everything back together but you need to be cautious and not focus too much on the spring.

Hope this helps!

• This topic was modified 17 hours, 12 minutes ago by guileukow.

[Dillen]

Available in polycarbonate, injection molded :
https://www.beoparts-shop.com/product/beocenter-5000-7000-7002-spring-holder-for-turntable-dust-cover/

Martin

• This reply was modified 1 hour ago by Dillen.

[guileukow]

Thanks Martin! Knowing this would have saved me couple of hours especially since I placed an order recently to them for the capacitor kit of my S45-2, so if I knew it before I would have ordered it too 😅.

Thanks!

[Author]

Posts