Beolab 2: No longer receiving signal

[mojofml]

I have a Beosound 4000 that outputs to Beolab 2, which is then daisy chained out to a pair of Beolab 6000. One day when I turned on the Beosound 4000, the Beolab 2 led indicator remained red and did not turn green as usual (I did notice that the led flickered to green for a quick moment but reverted back to red) and no sound out of the 6000s either.

I rewired the output cable from 4000 to 6000 directly, and there was sound, so the Beolab 2 is no longer receiving any signal. I tried different cables but this did not help either.

Any advice on what I can do or how I can test for issues? I do have another spare Beolab 2 that doesn’t fully work (but I believe various components within may still work), which I can use for donor parts, but would be great if I can get some advice on which parts or how I should go about for testing.

Thanks!

[Ralph]

Hi mojofml, The same thing happens to me with the BeoLab 2, I’m trying to find out, I’m not sure yet, but capable, they told me to be the amplifier. I go on asking

[Ralph]

Mojofml where are you from, because nobody answer me but I sent 6-7-24 asking the same about BL2 lights green red.
If you know something please tell me.
I change the “fuse” because it burns,  three times to a Beo Lab 2, (the fist time 2 or 3 years ago) but the last only two days;  it stays red or the power light flashes green to red and it is in one of the two colors but it does not emit sound.

[Author]

Posts